Description
Main functions of the koocu 919D
- Hot-air rework station
- Used for removing and installing SMD/IC components.
- Useful for charging-port, IC, capacitor, resistor and other board-level repairs.
- The hot-air section allows controlled heating of small components.
- Soldering station
- Provides a temperature-controlled soldering iron for soldering and desoldering electronic components.
- Useful for jumper work, replacing connectors and repairing PCB tracks.
- LCD/screen separator or preheater
- The built-in heating platform can be used to warm LCD screens before separation.
- A documented 919D configuration has a 110 × 205 mm heating plate, intended for displays up to about 9 inches, with a 50–120°C temperature range and approximately 80–90°C recommended for screen removal.
- DC power supply
- The 4-in-1 design incorporates a DC power-supply function for powering/testing electronic circuits and mobile-phone boards.
- This is particularly useful when troubleshooting a motherboard without relying on the phone’s battery.
Main specifications Of the KOOCU 919D
Typical specifications listed for the 919D include:
-
Total power: approximately 800 W.
-
Hot-air temperature: about 100–480 °C.
-
Hot-air flow: approximately 120 L/min on some versions.
-
Soldering-iron temperature: about 200–480 °C.
-
Soldering-iron output: roughly 50–60 W.
-
DC output: adjustable from 0–15 V and 0–2 A.
-
Digital temperature controls and display.
-
Automatic cooling after switching off the hot-air function.
-
Compact size of approximately 245 × 185 × 175 mm and weight around 4.5KG







There are no reviews yet.